CuZn36Pb3易切削鉛黃銅合金是含鉛高的鉛黃銅，不能熱態(tài)加工，可切削性極為優(yōu)良，且有高的減磨性能，用于鐘表結構件及汽車拖拉機零件。
Material CuZn36Pb3, mat. No. CW603N, is an unhardenable wrought alloy. to the comparable make CuZn36Pb3, mat. No. 2.0375 acc. to DIN 17660 : 1983-12 applies: High hardness and strength parameter are achievable by cold forming only. Thermal and electrical conductivity are lower than for the unleaded brass grade of the same Zn-content. Machinability is improved by Pb-addition. Corrosion resistance to water, several saline solutions and organic liquids is also lower than for unleaded alloys of the same zinc-content. Processing properties: warm forming: good cold forming: good machinability: very good hard soldering: moderately soft soldering: very good TIG-welding: unfavorable burnishing: very good Application: for thin-walled extruded profiles e.g. construction profiles, hand rails, for stair rails, for screw machine parts in watch and electrical industry as well as for precision mechanics and optics.
CuZn36Pb3化學成份：
銅 Cu ：62.0～65.0
鋅 Zn：余量
鉛 Pb：2.4～3.0
鉛 Pb：2.4～3.0
硼 P：≤0.01
鋁 Al：≤0.5
鐵 Fe：≤0.10
鈹 Sb ：≤0.005
鉍 Bi：≤0.002
注：≤0.75(雜質)
CuZn36Pb3力學功能：
抗拉強度 σb (MPa)：≥390
伸長率 δ10 (%)：≥10
伸長率 δ5 (%)：≥12
注 ：棒材的縱向室溫拉伸力學功能
試樣尺寸：直徑或對邊距離5～20
