半固態等溫處理與電磁感應加熱AZ80-0.2Y鎂合金組織的演變

半固態等溫處理與電磁感應加熱AZ80-0.2Y鎂合金組織的演變Microstructure evolution of AZ80-0.2Y magnesium alloy processed by semi-solid isothermal and induction heat-treatment

分別使用等溫處理與電磁感應加熱制備AZ80-0.2Y鎂合金半固態坯料，對比等溫處理與不同感應加熱功率條件下半固態組織形貌特征。結果表明：等溫處理半固態組織液相以晶界網狀液池為主、固相球內的球形液池為輔；感應加熱形成的液相主要由晶內長條狀液池為主、晶界網狀液池為輔。感應加熱制備的半固態坯料比等溫處理的半固態組織晶粒更細小，液相率更高；大功率感應加熱相對于小功率感應加熱，晶粒尺寸小，液相率更高；從室溫使用功率4 kW感應加熱至590 ℃用時90 s，平均晶粒尺寸65.1 μm，液相率45%，晶粒形狀系數2.15，已具備較優的成形性能。

Semi-solid billets of AZ80-0.2Y magnesium alloy were fabricated by isothermal and induction heat-treatment. The differences of microstructure morphologies were compared between isothermal and induction heat-treatment with different heating powers. The results show that the liquid phase mainly exists at grain boundary with isothermal heat-treatment. However, the liquid phase mostly presents intragranular strip shape with induction heat-treatment. The grain size of the billets processed by induction heat-treatment is smaller and the liquid fraction is bigger than that of isothermal heat-treatment. Besides, the semi-solid billets processed by induction heating treatment with bigger power (4 kW) have smaller grain size and more liquid phase. Good formability can be achieved by induction heating with power 4 kW. The average grain size is 65.1 μm, while the liquid fraction is 45%, and grain shape factor is 2.15.

全文下載：https://pan.baidu.com/s/1kVxfV51