擠壓溫度對Al-Zn-Mg-Cu合金動態再結晶、時效組織和力學性能的影響

擠壓溫度對Al-Zn-Mg-Cu合金動態再結晶、時效組織和力學性能的影響Effects of extrusion temperature on dynamic recrystallization, aging microstructure and mechanical properties of Al-Zn-Mg-Cu alloy

以Al-Zn-Mg-Cu合金為對象，研究了擠壓溫度對合金組織、織構及力學性能的影響。結果表明：當擠壓溫度為390~500 ℃時，隨著擠壓溫度的升高，擠壓態棒材發生動態再結晶程度由2.4%逐漸增大到41.3%，動態再結晶晶粒尺寸逐漸增大，而經固溶時效后，晶粒尺寸呈先增大后減小的變化趨勢，其中擠壓溫度為430 ℃時的晶粒尺寸最大。擠壓棒材固溶時效后的強度和伸長率均呈先增大后減小的趨勢，其中擠壓溫度為430 ℃時的抗拉強度、屈服強度和伸長率均較高，分別為678.1 MPa、618.3 MPa和9.2%。與晶粒尺寸較小的時效態擠壓棒材相比，晶粒尺寸較大的棒材具有更高的強度，其原因是由于大晶粒棒材中存在較多的硬取向Copper織構({112}á111？)和S型織構({123}á634？)。

The effects of extrusion temperature on the microstructure, texture and mechanical properties of Al-Zn-Mg-Cu alloy were investigated. The results show that, when extrusion temperature increases from 390 ℃ to 500 ℃, the extent of dynamic recrystallization of the extruded bar increases from 2.4% to 41.3%, and the dynamically recrystallized grain size also increases gradually. After solid solution and aging treatments, the grain size of the extruded bars increases initially and then decreases with the increase of extrusion temperature, and the grain size reaches the maximum at 430 ℃. Meanwhile, the strength and elongation of the aged bars also increase firstly and then decrease. The tensile strength, yield strength and elongation of the aged bar extruded at 430 ℃ are relatively high of about 678.1 MPa、618.3 MPa and 9.2%, respectively. The aged bar with larger grain size has higher strength than the one with smaller grain size, which is ascribed to existence of both the stronger Copper textures ({112}á111？) and S type textures ({123}á634？) in the bars with larger grain size.

全文下載：https://pan.baidu.com/s/1c4SnBg?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO  has  been  a  reliable  partner  and  supplier  of  sophisticated  and  high-quality  semi-finished  products  maed  of  alloys.  In dialogue  with  our  customers,  we  optimise  our  products  to  meet  the  specific  application  requirements.  TXCO  develops  the  best  alloy  material  solutions  for  current  and  future  challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For  more  information  on  the  products  and  services  that  we  supply,  call  us  at  086-021-6786 0205  or  email  us  at   service@sinoav.com.  You  can  also  get  in  touch  on  social  media,  we  are  constantly  active  on  Weixin,  Weibo,  LinkedIn,  Facebook,  Twitter  and  Google+.