成形角度對激光選區熔化成形CoCrMoW合金的影響

成形角度對激光選區熔化成形CoCrMoW合金的影響Effect of sloping angle on forming of CoCrMoW alloy by selective laser melting

以自主制備的氣霧化CoCrMoW合金球形微細粉末為原料，采用激光選區熔化(SLM)工藝成形出與加工平面成不同角度的試樣，并研究其顯微組織與物理力學性能。結果表明：成形試樣主要由FCC的γ相和HCP的ε相組成。隨著成形傾斜角度的增大，試樣的相對密度呈現先減小后增大的趨勢，傾斜角為90°時，試樣密度最高，相對密度達到99.2%；表面粗糙度呈現先增加后減小的趨勢，在0°時達到最小值7.84 μm，在15°時達到最大值19.85 μm；抗拉強度、伸長率及顯微硬度大致呈現先增大后減小的趨勢，抗拉強度和顯微硬度在60°時達到最大值，分別為1174MPa和412.5HV，伸長率在45°時達到最大值12.9%。

CoCrMoW alloy was formed by selective laser melting with different sloping angles using self-prepared spherical fine powder, its microstructure and mechanical properties were studied. The results indicate that microstructures of SLM samples are composed of γ phase in FCC structure and ε phase in HCP structure. With the increase of sloping angle, the alloy density decreases firstly and then increases gradually, and reaches at a maximum of 99.2% when the sloping angle is 90°. On the contrary, the surface roughness of the specimens increases initially and then decreases. A minimum roughness of 7.84 μm and a maximum roughness of 19.85 μm appear at 0° and 15°. Meanwhile, the ultimate tensile strength, elongation and microhardness arise initially, then drop afterward. The ultimate tensile strength and microhardness reach at a maximum of 1174 MPa and 412.5 HV, respectively, when the sloping angle is 60°. The elongation reaches at a maximum of 12.9% at an angle of 45°.

全文下載：https://pan.baidu.com/s/1boQoGAb?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO  has  been  a  reliable  partner  and  supplier  of  sophisticated  and  high-quality  semi-finished  products  maed  of  alloys.  In dialogue  with  our  customers,  we  optimise  our  products  to  meet  the  specific  application  requirements.  TXCO  develops  the  best  alloy  material  solutions  for  current  and  future  challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For  more  information  on  the  products  and  services  that  we  supply,  call  us  at  086-021-6786 0205  or  email  us  at   service@sinoav.com.  You  can  also  get  in  touch  on  social  media,  we  are  constantly  active  on  Weixin,  Weibo,  LinkedIn,  Facebook,  Twitter  and  Google+.