TiZr基非晶熔體與Ti合金的界面特征和熔體層結構

TiZr基非晶熔體與Ti合金的界面特征和熔體層結構Interfacial characteristics and microstructure of molten layer of TiZr-based metallic glass melt and Ti-based alloy

為研究TiZr基非晶熔體與Ti基合金之間的兩相交互作用，明確非晶復合材料中兩相平衡的控制因素及調控規律，利用改進的液橋方法，設計5組不同保溫溫度的液橋?qū)嶒?yàn)，其中保溫溫度分別為700、750、800、850和900 ℃，通過此實驗研究溫度對兩相界面特征及熔體層結構的影響。結果表明：界面處的基片發生溶解，且溶解深度隨著溫度的升高而增大，受重力影響，上基片溶解量略低于下基片的；兩相之間具有良好的成分穩定性，溶解進入合金熔體的Ti基合金保持成分基本不變以枝晶的形態析出。隨基片溶解量增大，熔體中析出的枝晶相的體積分?jǐn)?shù)增加，且枝晶相含量隨著離界面距離的增加逐漸減小。

In order to study the interaction between TiZr-based metallic glass melt and Ti-based alloy, and confirm the factors that control the two-phase equilibrium in bulk metallic glass composite, the effects of temperature on the interfacial characteristics and the microstructure of molten layer were studied at 700, 750, 800, 850 and 900 ℃, respectively, by using the modified liquid-bridge method. The interfacial characteristic was studied by scanning electron microscopy (SEM) and the microstructure of molten layer was analyzed by X-ray diffractometry (XRD). The results show that the substrate dissolves and its dissolution depth increases in accordance with temperature increasing. As the effect of convection, the dissolution depth of the lower substrate is higher than that of the upper one. TiZr-based metallic glass and Ti-based alloy show good componential stability. The Ti-based alloy which dissolves into the TiZr-based metallic glass melt can maintain its chemical components and precipitates in dendrite morphology. Besides, the volume fraction of dendrites in the molten layer increases with temperature and declines with increasing the distance from the interface.

全文下載：https://pan.baidu.com/s/1mjYIvjE?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.