SPS制備含鉬WC-6Co硬質合金的工藝性能

SPS制備含鉬WC-6Co硬質合金的工藝性能Effects of SPS sintering parameters on microstructure and properties of WC-6Co cemented carbides with Mo addition

以Mo粉、Co粉和自主研發的WC-6Co復合粉為原料，通過球磨、SPS制備Mo添加量為1%(質量分?jǐn)?shù))的細晶WC-6Co硬質合金。利用XRD、SEM、XPS、維氏硬度計和電化學工作站等研究SPS燒結溫度、保溫時間對合金組織和性能的影響。結果表明：隨著SPS燒結溫度的升高和保溫時間的延長，WC-6Co-1Mo合金相對密度和斷裂韌性持續增加，維氏硬度先增大然后略有下降。當燒結溫度為1250 ℃、保溫時間為5 min時，制備的合金綜合性能最佳。與相同工藝制備的WC-6Co和WC-6Co-4Mo合金進行對比，發現添加適量Mo能夠有效抑制WC晶粒的長大，提高合金的硬度和韌性，但相對密度減??；同時，也能夠增強合金在HCl溶液的耐腐蝕性能。

Using Mo powders, Co powders and WC-6Co composite powders as raw materials, the fine-grained WC-6Co cemented carbides with 1% Mo (mass fraction) addition were fabricated by ball-milling and spark plasma sintering technology. The effects of sintering temperature and holding time on the microstructure and properties of cemented carbides were investigated by XRD, SEM, XPS, Vickers hardness tester, electrochemical workstation, and so on. The results show that the relative density and fracture toughness of cemented carbides with 1% (mass fraction) Mo addition increase as the sintering temperature and holding time increasing. The Vickers hardness increases until the maximun value, and then follows a decreasing trend with the increase of sintering temperature and holding time. The best comprehensive properties achieve at temperature of 1250 ℃ ant holding time of 5 min comparing with WC-6Co and WC-6Co-4Mo cemented carbides prepared by the same processes. The results show that the appropriate content of Mo is beneficial for refining the WC grains, increasing the hardness and fracture toughness significantly. However, the relative density decreases with the addition of Mo slightly. Moreover, the corrosion resistance of WC-6Co cemented carbides in HCl solution increases with Mo addition.

全文下載：https://pan.baidu.com/s/1bfJ_YQgHaRR9lHk8CjB-IA?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.