TiAl合金高溫變形過程臨界損傷模型

TiAl合金高溫變形過程臨界損傷模型Development of critical damage model of TiAl alloy during hot deformation

運用Gleeble-1500D型動態熱模擬試驗機對Ti-47Al-2Nb-2Cr(摩爾分數，%)合金在溫度為950~1150 ℃、應變速率為0.001~1 s-1進行熱模擬壓縮試驗，通過對變形開裂后試樣斷口裂紋形貌的分析，闡明TiAl合金高溫變形過程的開裂損傷機理。結果表明：在低溫(＜1000 ℃)、高應變速率(＞0.1 s-1)條件下，TiAl合金高溫變形開裂方式為沿45°剪切開裂，隨著變形溫度的升高和應變速率的降低，材料發生縱向自由表面開裂。采用二分法確定TiAl合金不同溫度和應變速率下的臨界變形量，引入考慮溫度和應變速度參量的Zener-Hollomon因子，構建TiAl合金高溫變形過程臨界損傷模型。

The hot deformation behaviors of Ti-47Al-2Nb-2Cr (mole fraction, %) alloys were studied by Gleeble-1500D at the temperature range of 950-1150 ℃ and strain rate of 0.001-1 s-1. By true stress-strain curve analysis, fracture thermomechanical simulator appearance analysis, the results indicate that shear cracking along the direction of 45° with respect to the compression axis occurs at lower temperature (＜1000 ℃) and higher strain rate (＞0.1 s-1), then it is attributed free surface cracking along longitude with increasing deformation temperature and decreasing strain rate. The critical strain is obtained by bisection method at various temperature and strain rates. The Zener-Hollomon parameter, which considers the effect of temperatures and strain rate, is employed to establish the correlation among critical strain and hot processing parameters in the present investigation. Finally, a fracture criterion of Ti-47Al-2Nb-2Cr alloy during hot deformation is successfully developed and verified by experiment.

全文下載：https://pan.baidu.com/s/17MIf2Klt96jc_IwJXgoZEA?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.