Inconel625高溫合金J-C本構建模

Inconel625高溫合金J-C本構建模J-C constitutive modeling of high temperature alloys Inconel625

為了研究Inconel625高溫合金在較高溫度和應變率變化范圍內的熱變形行為，采用CSS電子萬能試驗機和分離式霍普金森壓桿試驗裝置對Inconel625高溫合金進行準靜態試驗和霍普金森壓桿試驗，在溫度為20~800 ℃、應變率為0.001~8000 s-1范圍內得到Inconel625高溫合金的真實應力—應變曲線。結果表明：隨著溫度的升高，Inconel625高溫合金的流動應力與屈服應力并不單一地隨應變率增大而增大，同一溫度條件下，隨著應變率的增加，Inconel625高溫合金的真實應力先增大后減小(分界線是應變率為6000 s-1)；同一應變率條件下，Inconel625高溫合金的真實應力隨著溫度的升高而減小。基于Johnson-Cook模型對其真實應力-應變曲線進行擬合分析，經過計算得到模型的預測值與實驗值的相關性和絕對誤差，并進一步改進Inconel625高溫合金的Johnson-Cook本構模型，使模型能夠更好地反映Inconel625高溫合金在較高溫度和應變率變化范圍內的熱變形規律。

In order to study the thermal deformation behavior of Inconel625 superalloy at high temperature and strain rate range, the quasi-static test and Hopkinson pressure bar test of Inconel625 superalloy were carried out by using CSS electronic universal testing machine and split type pressure bar test device. The true stress-strain curves of Inconel625 superalloy were obtained in the range of 20-800 ℃ centigrade and strain rate of 0.001-8000 s-1. The experimental results show that the low stress and yield stress of Inconel625 superalloy do not increase with the increase of strain rate. Under the same temperature, the true stress of Inconel625 superalloy increases first and then decreases with the increase of strain rate (the dividing line is strain rate of 6000 s-1). While under the same strain rate, the true stress of Inconel625 superalloy decreases with the increase of temperature. Based on the Johnson-Cook model, the true stress-strain curves are fitted and analyzed. The correlation coefficient and the absolute error between the predicted value and the experimental value are obtained by calculation. By improving the Johnson-Cook constitutive model of Inconel625 superalloy, the model can be used to characterize the themal deformation of Inconel625 superalloy at high temperature and strain rate range.

全文下載：https://pan.baidu.com/s/1t-6VVwUzqUzPXujoGR5YRg?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.