大規格SAE4330V-MOD合金鋼金礦鉆桿的熱處理工藝

大規格SAE4330V-MOD合金鋼金礦鉆桿的熱處理工藝Heat Treatment Process of Large-section SAE4330V-MOD Alloy Steel Drill Pipes Used in a Gold Mine

通過對大規格SAE4330V-MOD合金鋼金礦鉆桿進行不同溫度的淬火和回火熱處理,探討研究了該合金鋼的調質熱處理工藝.結果表明:將該鋼先加熱到650 ℃保溫3 h,然后升溫至860 ℃保溫6 h后淬入不高于70 ℃水中,最后在620 ℃回火6 h后出爐空冷,該鋼可獲得均勻細小的回火索氏體組織,且抗拉強度、沖擊功和硬度等達到最佳匹配,各項力學性能均能滿足技術要求;若該鋼熱處理前的原始組織中存在少量的貝氏體,則會導致其熱處理后的力學性能不能滿足技術要求,因此熱處理前應嚴格控制該鋼的原始顯微組織.

Through quenching and tempering the large-section SAE4330V-MOD alloy steel drill pipes used in a gold mine at different temperatures,the heat treatment process of the steel was studied.The results show that by first heating the steel to 650 ℃ and holding for 3 h,then heating to 860 ℃ and holding for 6 h following quenching in less than 70 ℃ water,and finally tempering at 620 ℃ for 6 h,uniform fine tempered sorbite microstructure could be obtained and best match among tensile strength,impact energy and hardness was achieved with various mechanical properties all meeting the technical requirements.If there was small amount of bainite in microstructure of the steel before heat treatment,it would lead the mechanical properties after heat treatment could not meet the requirements.Therefore,original microstructure of the steel should be strictly controlled.

全文下載：https://pan.baidu.com/s/1_PApPR4h-oBqGvF1pLB-Ig?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.