Mg-6Zn-xCu-0.6Zr合金凝固路徑及熱裂傾向性

Mg-6Zn-xCu-0.6Zr合金凝固路徑及熱裂傾向性Solidification path and hot tearing tendency of Mg-6Zn-xCu-0.6Zr alloys

基于修正的Clyne-Davies熱裂模型(CSC*)，對Mg-6Zn-xCu-0.6Zr(x%=0，1%，2%，3%，質量分?jǐn)?shù))合金熱裂傾向性進行預測；采用雙電偶熱分析法研究Mg-6Zn-xCu-0.6Zr合金凝固路徑、凝固過程中的特征溫度、枝晶干涉固相分?jǐn)?shù)等。利用“T”型熱裂模具測試系統采集Mg-6Zn-xCu-0.6Zr合金凝固收縮力隨溫度(或時間)的變化曲線。實驗結果與CSC*預測值均表明合金的熱裂傾向性隨著Cu含量的增加而減小。Cu元素的加入使初生α-Mg相的析出溫度降低、MgZn2相的析出溫度升高，從而使合金的凝固溫度區間變窄，降低合金的熱裂傾向性。Mg-6Zn-(0,1)Cu-0.6Zr合金熱裂紋斷口主要為液膜和分離的自由枝晶臂。Mg-6Zn-(2,3)Cu-0.6Zr合金斷口表面生成大量的低熔點共晶相，液膜較厚，增強殘余液相對分離的枝晶補縮能力，降低合金的熱裂傾向性。

Hot tearing tendency of Mg-6Zn-xCu-0.6Zr (x%=0, 1%, 2%, 3%, mass fraction) alloys were predicted based on modified Clyne-Davies model (CSC*). The solidification path, characteristic temperature during solidification, the solid fraction in coherent dendrite point of Mg-6Zn-xCu-0.6Zr alloys were studied by the double thermocouples thermal analysis. The curve of solidification contraction stress with temperature (or time) of Mg-6Zn-xCu-0.6Zr alloys were measured using the “T” type hot tearing permanent-mold. The results show that the CSC* prediction values are in good agreement with the experimental results. The hot tearing tendency decreases with increasing Cu content. The precipitation temperature of primary α-Mg phase decreases and the precipitation temperature of MgZn2 phase increases by addition of Cu element, thus shortening the solidification temperature range of alloys and decreasing the hot tearing tendency. The hot cracking fractures of Mg-6Zn- (0,1) Cu-0.6Zr alloys are mainly occupied by the liquid film and separated free dendrite arm. A large number of eutectic phase with low melting point and the thicker liquid film were observed on the fracture surfaces of Mg-6Zn- (2,3) Cu-0.6Zr alloys which enhances the feeding ability and reduces the hot tearing tendency.

全文下載：https://pan.baidu.com/s/15g2mbSiCWIpkcNkX3Rtwtw?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供優質的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the superior alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.