Fe/Ni比對WC-Fe-Ni硬質合金微觀組織及性能的影響

Fe/Ni比對WC-Fe-Ni硬質合金微觀組織及性能的影響Effects of Fe/Ni ratio on microstructure and properties of WC-Fe-Ni cemented carbide

在1450 ℃下低壓燒結制備5 種不同F(xiàn)e/Ni比(質量比)的WC-Fe-Ni硬質合金，通過SEM、TEM、XRD、力學性能測試和電化學測試研究Fe/Ni比對硬質合金的顯微組織和性能的影響。結果表明：隨Fe/Ni比增大，晶粒尺寸先下降后上升； Fe/Ni比為3:1時，合金晶粒尺寸最小，為1.24 μm；合金抗彎強度變化趨勢和晶粒尺寸變化呈反比；硬度不斷提高，斷裂韌性變化與燒結致密度變化均保持先上升后下降趨勢；在Fe/Ni比為3:1時，合金斷裂方式主要為沿晶斷裂，在Fe/Ni比不等于3:1時會出現較多穿晶斷裂；合金耐酸性溶液腐蝕能力不斷變差。當Fe/Ni比為 3:1時，合金的綜合性能最好，其硬度、抗彎強度、斷裂韌性、腐蝕電流密度分別達到934HV、3047 MPa、23.3 MPa？m1/2、3.98×10-5 A/cm2。

WC-Fe-Ni cemented carbides with five kinds of Fe/Ni ratio were prepared by 1450 ℃ sinter-HIP sintering to study the effects of Fe/Ni ratio on the microstructure and properties by SEM, XRD, mechanical performance test and electrochemical test. The results show that with the increase of Fe/Ni ratio, the grain size firstly decreases and then increases. The grain size reaches the finest (1.24 μm) with Fe/Ni ratio of 3:1. And with the increase of Fe/Ni ratio, the changing trend between bending strength and grain size is inverse, the hardness increases continuously, both of fracture toughness and sintering density firstly increase and then decrease. When Fe/Ni ratio is 3:1, fracture mode is mainly intergranular fracture. Except for the alloy with Fe/Ni ratio of 3:1, more transgranular fracture appears. The acidic corrosion resistance ability gets worse continuously. When Fe/Ni ratio is 3:1, WC-Fe-Ni alloy exhibits optimum properties, the hardness, bending strength , fracture toughness and corrosion current density are 3047 MPa, 934HV, 23.3 MPa？m1/2 and 3.98×10-5 A/cm2, respectively.

全文下載：https://pan.baidu.com/s/1yVzS0NORryBecvsl62KMHw?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供優秀的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the superior alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-3113 6111或發電子郵件service@txco.ltd聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-3113 6111 or email us at service@txco.ltd. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.