AA2024-H18鋁合金同步冷卻熱成形后的強化機制AA2024-H18鋁合金同步冷卻熱成形后的強化機制Strengthening mechanism of hot forming with synchronous cooling of AA2024-H18 aluminum alloy 為了研究同步冷卻熱成形工藝對可熱處理鋁合金的顯微組織演變規律以及強化機制的影響，選用H18態AA2024鋁合金板料進行同步冷卻熱成形及自然時效試驗，并進行力學性能測試、光學顯微組織觀察及TEM分析。結果表明：同步冷卻熱成形工藝對AA2024鋁合金的顯微組織影響明顯；H18態AA2024鋁合金板料經過同步冷卻熱成形及96 h自然時效后，試樣變形區的位錯密度增加，并出現細針狀的Al2CuMg(S′)相，使得變形區的屈服強度及抗拉強度分別較冷沖壓工藝試樣提高4%、12%；此時，AA2024鋁合金的強化機制主要是彌散相Al20Cu2Mn3(T相)和沉淀相Al2CuMg(S′相)對位錯的釘扎作用，以及位錯間的相互作用。 Hot forming test with synchronous cooling, metallographic and TEM observation and tensile test were performed to investigate the influence of hot forming with synchronous cooling operations on the microstructure evolution and strengthening mechanism of AA2024-H18 aluminum alloy. The results show that, the yield strength of hot formed AA2024 sheet with 96 h natural aging is 4%, which is superior to that of traditionally formed sheet, and meanwhile, the tensile strength is increased by 12%. Based on the microstructure observation and analysis, the strengthening is generated by the increase of the dislocation density and precipitation of some fine acicular particles in form of Al2CuMg (S′). The main strengthening mechanism of AA2024 aluminum alloy underwent hot forming with synchronous cooling is the pinning effect of dispersoid phase Al20Cu2Mn3 (T) and precipitated phase Al2CuMg (S′) on dislocation as well as the interaction of dislocation. 全文下載：http://pan.baidu.com/s/1qYuOnyk
|
