預退火時間對累積疊軋超細晶銅室溫拉伸斷裂行為的影響

預退火時間對累積疊軋超細晶銅室溫拉伸斷裂行為的影響Effect of pre-annealing time on tensile deformation behavior of accumulative rolling bonding ultrafine grained Cu at room temperature

對采用嚴重塑性變形方法制備的超細晶金屬進行退火處理，是提高該類材料綜合性能的常見方法。為保證晶粒不發生明顯長大，對累積疊軋(ARB)方法制備的超細晶純銅在100 ℃(低于再結晶溫度)時進行退火處理，研究保溫時間對ARB超細晶銅室溫拉伸斷裂行為的影響以及樣品的微觀結構、力學行為、斷口形貌，并對其力學性能和斷裂機制進行分析。結果表明：當退火時間為30 min時，ARB超細晶銅的屈服強度和抗拉強度都達到退火態的極大值。斷口的大量韌窩表明：退火時間30 min時的材料具有一定的塑性變形能力，斷裂機制以韌性斷裂為主，因此，退火時間為30 min時，ARB超細晶銅的強度與塑性達到最佳匹配。

Preparing ultrafine grained (UFG) materials by annealing treatment is a common method to improve the plasticity of severe plastic deformation (SPD) materials. The ultrafine grained pure Cu prepared by accumulative rolling bonding (ARB) method at 100 ℃ (below the recrystallization temperature) was annealed in order to ensure that the grain does not grow obviously. The effect of different holding time on the tensile deformation behavior of ARB-Cu at room temperature was investigated. The microstructures, the fracture morphologies and the mechanical curves of ARB-Cu were analyzed, the mechanical property and the microscopic fracture mechanism were discussed. The results show that, when the annealing time is 30 min, the yield strength, the tensile strength and the plastic all reach the maximum of the annealed states. The number of dimple can be known that it has certain plastic deformation ability, the fracture mechanism is ductility fracture. In conclusion, the strength and plasticity of the annealing time 30 min reach the best match.

全文下載：https://pan.baidu.com/s/1nvCDwnR?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO  has  been  a  reliable  partner  and  supplier  of  sophisticated  and  high-quality  semi-finished  products  maed  of  alloys.  In dialogue  with  our  customers,  we  optimise  our  products  to  meet  the  specific  application  requirements.  TXCO  develops  the  best  alloy  material  solutions  for  current  and  future  challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For  more  information  on  the  products  and  services  that  we  supply,  call  us  at  086-021-6786 0205  or  email  us  at   service@sinoav.com.  You  can  also  get  in  touch  on  social  media,  we  are  constantly  active  on  Weixin,  Weibo,  LinkedIn,  Facebook,  Twitter  and  Google+.