熱處理制度對新型Al-Cu-Li合金組織與性能的影響

熱處理制度對新型Al-Cu-Li合金組織與性能的影響Effect of heat treatment on microstructure and properties of new Al-Cu-Li alloy

采用硬度測試、力學性能測試、SEM、EDS和TEM分析等方法，研究不同固溶處理和時效處理制度對新型Al-Cu-Li合金組織與性能的影響。結果表明：合金經490 ℃、1.5 h固溶處理后，第二相粒子回溶充分，未回溶第二相為AlCuFeMn相，合金斷口形貌呈沿晶斷裂與少量韌窩形貌混合特征。合金適宜的T6制度為175 ℃、48 h，抗拉強度、屈服強度和伸長率分別為447 MPa、369 MPa和8.9%。適宜的T8制度為預變形6%+(160 ℃、36 h)，抗拉強度、屈服強度和伸長率分別為500 MPa、454 MPa和10.5%，此時合金具有較好的強塑性匹配。合金在T6和T8態的強化相均為復合相δ′/β′相、θ′相和T1相3種。時效前的預變形可顯著提高合金強度，隨預變形量的增加，合金強化相由δ′/β′相、θ′相和T1相為主逐漸轉向以T1相為主，T1相比θ′相、δ′相具有更佳的強化效果。

The relationship between microstructures and properties of a new Al-Cu-Li alloy under different solid solution and aging treatments were studied by hardness test, tensile test, SEM, EDS and TEM analysis. The results show that the second phase particles of the alloy are fully dissolved by solid solution treatment at 490 ℃ for 1.5 h, and the remaining second phase is AlCuFeMn phase. The fracture mode of the alloy is characterized by intergranular fracture and small dimple mixed fracture. The suitable T6 temper of the alloy is (175 ℃, 48 h), and the corresponding tensile strength, yield strength and elongation rate are 447 MPa, 369 MPa and 8.9%, respectively. The suitable T8 temper of the alloy is 6%+(160 ℃, 36 h), and the corresponding tensile strength, yield strength and elongation rate are 500 MPa, 454 MPa and 10.5%, respectively. The alloy shows excellent combination of strength and ductility when the pre-deformation ratio is controlled at about 6%. The strength phase of the alloy are composite phase δ′/β′, θ′ and T1 in T6 and T8 temper. The pre-deformation greatly improves the strength of the alloy. With the increase of the pre-deformation, the mainly strengthening phase of the alloy gradually change from δ′/β′, θ′ and T1 to the T1 phase. T1 has better strengthening effect compared with δ′/β′ phase and θ′ phase.

全文下載：https://pan.baidu.com/s/1pnKaYjCFFnlUYVtYXv_v6g?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.