噴射成形7055鋁合金的熱變形行為和加工圖

噴射成形7055鋁合金的熱變形行為和加工圖Hot deformation behavior and processing map of spray formed 7055 aluminum alloy

通過高溫熱壓縮實驗研究噴射成形7055鋁合金的熱變形行為，實驗溫度為340~480 ℃，應變速率為0.001~1 s-1。結果表明：該合金在變形過程中的流變應力隨著溫度升高和應變速率的降低而降低，在480 ℃時會出現失穩現象。變形過程中的主要軟化機制為動態回復和動態再結晶，其中低溫時，動態回復占主導地位，隨著溫度升高，軟化機制逐步轉變?yōu)閯討B(tài)再結晶，再結晶晶粒的尺寸隨著溫度的升高而增大?；趧討B(tài)材料模型和極化互惠模型，結合熱變形中的組織演變，確定該合金在應變量為0.7時的適宜加工范圍為：溫度范圍400~420 ℃，應變速率0.01~0.1 s-1，此時對應的動態材料模型加工圖能量耗散效率超過33%，極化互惠模型加工圖內在加工參數在65%~70%之間。

The hot deformation behavior of spray formed 7055 aluminum alloy was studied by a series of isothermal compression tests at different temperatures ranging from 340 ℃ to 480 ℃ and strain rates varying from 0.001 s-1 to 1 s-1. The results show that the flow stress decreases with increasing temperature and deceasing strain rate, and the instable behaviors occurs at 480 ℃. The main softening mechanisms are dynamic recovery and dynamic recrystallization. The dynamic recovery occurs at low temperature and it turns to dynamic recrystallization as temperature increases. The grain size increases with increasing temperature. Based on dynamic materials model, polar reciprocity model and microstructure evolution, the appropriate processing conditions for this alloy are in the strain rate range of 0.01–0.1 s-1 and deformation temperature range of 400–420 ℃, with power efficiency over 33% and intrinsic workability parameter of 65%–70%, respectively.

全文下載：https://pan.baidu.com/s/1j0PCBJMUOzWXaZ-di_BnpA?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.